TBL-ThermoplasticBioLogic, Envir-A-Line

Envir-A-Line XX

Photo Opaque PVC with Hytrel™ Liner

Envir-A-Line XX is ideal for many gases and hydrocarbons. Envir-A-Line has a unique co-extruded construction, incorporating a highly inert Hytrel™ liner that creates an excellent gas and moisture barrier. Its moisture permeability is similar to poly-ether based urethanes. The product’s outer shell is comprised of a photo opaque black PVC. Because the PVC outer shell is permeable the product can be repeatedly autoclaved without the two materials separating.

Hytrel™ contains no plasticizers and does not outgas, making Envir-A-Line an excellent choice for potable water equipment.

Envir-A-Line is FDA approved and compliant with NSF standards for potable water.

*Also available with photo opaque hygienic white outer shell, high pressure outer braiding for higher pressures.

Sizing Chart

P/N	ID	OD	Wall	Size No.	Std. Lenth
TBL-05X1	.170"	1/4”	.04"	1	50',100'
TBL-05X2	1/4"	3/8"	1/16"	4	50',100'
TBL-05X3	3/8"	1/2"	1/16"	5	50',100'
TBL-05X4	1/2"	5/8"	1/16"	8	50',100'
TBL-05X5	1/2"	11/16"	.093"	13	50'
TBL-05X6	1/2"	3/4"	1/16"	16	50'

Physical Properties

Properties	Inner Liner	Outer Shell
Hardness	55 Shore D	80 Shore D
Tensile Strength, PSI	5200	2000
Elongation at Break, %	450	400
Brittle Temp	-51 units	-41
Specific Gravity	1.2	1.2
Temp Rating	194 F	165 F

Applications

Potable Water
Enviromental Monitoring Equipment (air)
Welding Gases TIG/MIG/MAP
Refrigerant Gases
Hydrocarbons

Benefits

High Purity Liner/High Temperature
Extremely low gas and moisture permeability
No plasticizers
Photo Opaque FDA and NSF approved
Excellent Flexibility

Packaging

Continuous coils
Pre-cut lengths
Crimped ends

Sterilization

Ethylene Oxide (ETO)
Autoclave

Certifications

CFR Title 21 Section 177.1550
CFR Title 21 Section 177.2600
NSF