Pharm-A-Clear R™ Braided Silicone Hose :: Platinum-Cured

Pharm-A-Clear™ R – Braided Silicone Hose

Platinum Cured | High Temperature | High Pressure | USP Class VI | ISO 10993 | FDA CFR 177.2600

Braided Silicone Tubing

High Performance Hose for the Most Demanding Applications

For higher temperature and pressure applications or those with a need for improved kink resistance, we also offer our Pharm-A-Clear™ R, platinum-cured braided silicone tubing. Pharm-A-Clear™ R is constructed using an inner and outer platinum-cured silicone shell with a polyester inner braiding. The inner core is a softer (50 durometer, shore A) material for flexibility, while the outer shell is slightly harder (60 durometer, shore A) for strength.

Pharm-A-Clear™ R Meets the Highest Regulatory Standards

Our tubing is Animal derived ingredient Free (ADIF), meets USP Class VI, FDA CFR 177.2600, and ISO 10993 Requirements. Pharm-A-Clear™ R is manufactured in an ISO Class 7 clean room. Please contact us us for our extensive validation package.

Compatible With Most Modern Sterilization Techniques

Pharm-A-Clear™ R stands up to repeated sterilization cycles including, but not limited to, ethylene oxide (EO), autoclave, steam in place (SIP), gamma irradiation, and e-beam irradiation. Although this hose has one of the longest service lives in it’s class, after repeated exposure to high temperature sterilization cycles the hose will become “gummy”, at which time it should be replaced.

For more information on sterilization methods, please read our blog post about how to sterilize silicone tubing or contact us.

Sizing Chart

P/N ID OD Wall Max. Work. Pressure Std. Length Tri Clamp
PLTS-R-125-50 .125″ .345″ .110″ 170 psi 25′,50′ Mini, 1″
PLTS-R-187-50 .187″ .407″ .110″ 164 psi 25′,50′ Mini, 1″
PLTS-R-250-50 .250″ .490″ .120″ 135 psi 25′,50′ Mini, 1″
PLTS-R-375-50 .375″ .625″ .125″ 130 psi 25′,50′ Mini, 1″
PLTS-R-500-50 .500″ .800″ .150″ 100 psi 25′,50′ Mini, 1″
PLTS-R-625-50 .625″ .965″ .170″ 91 psi 25′,50′ 1″
PLTS-R-750-50 .750″ 1.10″ .175″ 80 psi 25′,50′ 1″
PLTS-R-875-50 .875″ 1.240″ .180″ 66 psi 25′,50′ 1″
PLTS-R-1000-50 1.00″ 1.380″ .190″ 60 psi 25′,50′ 1″

Applications

Bio Process Equipment
USP Water
Hot WFI
Sterile Transfer
Cell Culture Media
Clean Steam
Asceptic Fill and Transfer

Benefits

Superior Bio Compatibility
Rated for High Temperatures (Steam in Place)
High Pressure Rating
Extremely Flexible
No taste or Odor Imparted
Ultra-Pure Medical Grade
Non-Pyrogenic
Lot and Batch Traceable

Packaging

Continuous coils
Available with Unitized Sanitary (Tri-Clamp) Ends
Molded Manifolds

Sterilization

Ethylene Oxide (ETO)
Steam in Place
Autoclave
Gamma Irradiated

Certifications

U.S. Pharmacopoeia Class VI
Cytotoxicity Criteria
CFR Title 21 Section 177.2600
Traceability: Lot and Batch
Certification: Lot and Batch
Current Good Manufacturing Practices (CGMP)
Animal Derived Ingredient Free
Note: Material properties may be affected greatly by temperature, operating pressure, chemical concentration, the presence of other chemicals,
and other factors. Ultimately, users should determine the compatibility of any product through field testing under their particular process
conditions. Specifications are subject to change without notice.